產品展示
     
 

LDY型電動單粱起重機[LDY型電動單梁起重機]

 

      LDY型電動單粱起重機依據JB/T1306-2008標準及國家質檢總局[2007]375號文的相關要求所設計制造,適用于小型鑄造車間吊運融熔金屬和搬運物料及臺模使用。
   本系列產品起重量為1~10t,跨度為7.5~31.5m,工作級別為A6級。

主要特點:

1.本系列產品主、端梁結構采用LDA型電動單粱起重機箱型主梁及端梁結構形式。
2.起升機構匹配單速或雙速升降的冶金專用鋼絲繩電動葫蘆。其特點是升降具有雙制動、雙限位和超載保護功能,起升機構工作級別不小于M6級。
3.大車運行機構采用具有緩起、制動功能的電動機。操縱本產品要求遠離熱輻射源,一般采用遙控操縱,如果采用地面手把按鈕操縱,手把按鈕要設置單獨滑道。


     LDY electric single-girder crane, complying with JB/T1306-2008 standards and relevant requirements of the AQSIQ[2007]375.can be used to hoist and convey molten metal and assemble modules in small-scale foundries.


Performance data
Lifting load capacity    1~10t
Range of span    7.5~31.5m
Allowed crane classification group    A6


Main Features:
1.The main girder and end carriage’s frames refer to those of LDA crane.
2.Hoisting mechanism, mainly used for casting,matches with electric wire rope hoist with single-speed or two-speed. The hoist is characterized with dual brakes, double Iimiters of displacement and overload protection and its cassification group is not less than M6.
3.The travelling mechanism adopts motors with soft-start and braking function.
4.The manipulation of this crane is required to stay away from thermal-radiated sources. It is generally manipulated by remote control or cab"s,if ground button control is required, a separate slide should be added.

 
 
   
  版權所有:山東煙起起重設備有限公司(原煙臺市起重設備廠),制作維護:煙臺一搜軟件技術開發有限公司      公司簡介 / 產品展示 / 新聞中心 / 下載中心 / 留言板 / 聯系方式
网址http:‖www色情com